TRANSCRIPTION

This is a video to show folks out there how to install the EQ-RLR350KIT. It comes with the spring tray. It comes with eight of these dog bones, some people call them eyeglasses, and it comes with the two bolts.

Okay we’re gonna move over to the engine block and we’re gonna show you how to install these. First off you’re going to install the eyeglasses over your lifters. One quick note, just for folks that don’t know, the reason why they’re flat on one side is because you have flat sides on the lifters so you gotta match that up.

After the installation of the lifter dog bones then what you’ll do is you’ll take the spring retention plate, place it down over there as you can see it. The three holes line up, you’ll place the 5/16 bolt in the hole. Put it down, get a ratchet, tighten the bolts down. At this point you’d get a torque wrench, set it at 15 pounds, foot pounds, of torque and go ahead and torque all three and you're done.